- Ready to use
- Compatible with UHS and regular speed burnishing
- No need for pre-sealers or undercoats except on extremely porous floors
- Easy to repair and highly scratch resistant
Research Marbletech offers a wet look gloss combined with high adhesion and wear resistance on stone and terrazzo surfaces when burnished with electric or gas burnishing machines. May also be
used on unglazed quarry tiles or terracotta. Can be applied over base sealer Blockade for extended wear resistance on stone. Can also be used on problem floors like unglazed ceramic tiles, granite and slate.
Directions for use:
Floor Prep: Ensure the surface is free from grease and dirt. Also make sure any old coatings have been removed. To clean the surface, use Crossfire as directed. For the removal of any other water based old coatings or curing oils, use Meltdown as directed. Once all contamination is removed, rinse well with clean water and allow to dry.
Finish Application: Bedrock may be used as a pre-sealer if the floor is highly porous. Apply 3-4 coats of Marbletech using a poly-cotton mop or a nylon polish spreader. 2-5 coats of Marbletech are generally required to achieve a high gloss appearance. Allow at least 35-40 mins between coats or wait until it is completely dry.