Whiteley Glamour Terrazzo Floor Sealer 5 Litre

$70.00 inc GST


• High gloss
• Hard wearing for high traffic areas
• Scuff mark and abrasion resistant
• Easy application and fast drying

Whiteley Glamour Terrazzo Floor Sealer provides a tough and durable finish, excellent gloss and outstanding depth. Glamour has excellent levelling characteristics allowing for an even finish with minimal effort.

Directions for use:
Stripping: Remove existing polish and/or sealer using Whiteley Industrial Xpoly8 or Zip Strip, ensuring to follow all procedures and directions as per label. Pick up all remaining residue and rinse area with a solution of Tempo HD at a dilution of 9mL/ Litre of water. Once the floor is dry it is ready to be sealed.
Sealing: Apply first coat of Glamour using a clean applicator, allow 30 minutes drying time between coats(this may vary depending on airflow and drying conditions.) Apply a further 3-4 coats of Glamour ensuring each additional coat is laid on a dry surface. If using Impact as a base for Glamour , apply 1-2 coats of Impact followed by 2-3 coats of Glamour.

NOTE: Do not apply when floor temperature is lower than 10°C. Always test on a small inconspicuous area before applying to the whole floor.

Cutback and Recoat: Sweep area to be cutback. Mix a solution of Tempo HD at a dilution of 17mL/Litre of water. Apply solution onto surface and allow it to work for 4 to 5 minutes. Depending on condition of floor wet scrub the area using an auto scrubber or swing buffer fitted with blue or black pads. Pick up all solution with auto scrubber, wet vacuum cleaner or mop and bucket. Rinse area with clean water ensuring all residue is gone. When dry, buff area to enhance durability and gloss then sweep to remove all dust. Apply 2-3 coats of Glamour using a clean polish applicator. Always allow each coat to dry before laying the next coat. If time permits, buff the last coat after it is dry to assist with curing and to enhance gloss and durability.

Whiteley Glamour Technical Bulletin


You may also like…