Whiteley Protect Stone and Concrete Sealer 5 Litres

$80.00 inc GST


  • Preserves the surfaces natural look
  • Suitable for internal & external use
  • Helps repel both oil and water based stains
  • Does not contain dangerous or toxic solvents
  • Helps to prevent acid damage and efflorescence
  • Non-yellowing and UV resistant
  • Water-based sealer
  • Suitable for use on most porous surfaces including concrete, sandstone, granite, marble, slate, brick and tiles.

Whiteley Protect Penetrating Sealer is suitable for use on most porous surfaces including concrete, sandstone, granite, marble, slate, brick and tiles. It helps protect surfaces against staining and is labour saving due to the cleaning process being fast and easy!
Protect Penetrating Sealer maintains the natural appearance of the sealed surface. It is UV resistant and suitable for both indoor and outdoor applications and is easy to apply to surfaces and requires minimal labour.

Directions for use:
Test in a small inconspicuous area to determine suitability for the intended use. The surface should be clean, dry and free from any waxes, coatings or finishes. Cover any painted or stained surfaces adjacent to the application area.
Apply Protect to surface with a brush, roller or garden type sprayer. Remove any remaining sealer that has not penetrated the surface after 10 minutes. A minimum of two coats is
recommended, although additional coats may be required on porous surfaces or heavy walkway areas to ensure sufficient protection. Allow 30 mins drying between coats (longer in humid or cold conditions).
It is highly recommended that the treated surface be kept clean and free of soils for at least 24 hours to allow optimal curing.

For cleaning of external areas, use a garden hose with a pressure nozzle. High-pressure cleaning is not recommended. For cleaning of internal areas, simply mop or wipe with a soft cloth and a mild detergent. Do not use harsh cleaning agents such as abrasive powders, ammonia, acids, solvents or bleach. Protect Penetrating Sealer will protect treated surfaces for many years. Under certain high wear conditions, such as heavy walkways, the surface should be tested periodically and additional sealer applied if necessary.

Coverage: 1 Litre will cover approximately 20m2 per coat depending upon the material to be treated and method of application

Protect SDS


You may also like…